|
|
High Speed Padding Mangle
- The High Speed Padding Mangle is a small machine used for textile printing
- Designed to provide continuous process of fabric preparation
and colorization for printing . This could be also used as post treatment machine or for colorization of fabrics.
- Coating: The amount of coating emulsion could be adjusted
to suit all types of dyes, including reactive, acid and disperse
dyes.
- Colorization:- The fabric can be coated with all types of dyes
including reactive, acid & disperse dyes.
- The unit automatically feeds fabric into an coating
unit, drying the fabric after coating and winds the fabric into
rolls at the completion of the process.
- All units are exchangeable and works as as plug-in system.
| |
Units |
|
| Fabric Maximum Width |
mm |
2200 |
| Maximum Temperature |
C |
180 |
| Maximum Speed |
linear m/hr |
Up
to 100 (Linear meters) |
| Machine Length |
m |
3.35 |
| Machine Width |
m |
2.5-3.2 |
| Machine Height |
m |
2.02 |
| Tank Capacity |
L |
100 |
| Water
Consumption |
L/hour |
250 |
| Power Supply |
|
380/415V, 50Hz or 220V, 60Hz3 phase, neutral, earth wire, 100A |
| Power Consumption |
kW |
45.0 |
| Fabric Roll Diameter max. |
mm |
350 |
FABRIC FEEDER
- Fabric unwinding device with fabric tension roller for fabric rolls of 250mm
- Fabric join bar with needle holder
COATING
- Stainless steel coating unit
- This unit could handle fabrics of width up 2200mm.
- The speeds of coating and speed of fabric are adjustable according to used fabric. All set-ups are accessible using
friendly touch screen.
- Separate liquid tank allow easy exchange of used coating formula and is equipped with mixer for coating formula mixing and
constant steering through coating process.
DRYER
- The dryer is infra-red, double walled and is fully insulated to minimize any heat loss.
- The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet
- Small exhaust fan is situated on top of dryer.
BATCHING
- Fabric re-winder can accommodate rolls up to 250 mm diameter and includes automatic speed control, which is regulated by a
"dancing" bar.
- The unit consists of scroll roller and one side fabric edge control.
- All functions of the Mangle are controlled by PLC with programmable terminal in auto and manual mode. The control panel is
located in easy to reach position. This Mangle can be attached to the printer for getting error logs etc.
 >>
zoom
|
|
|
