|
|
Steam-X 1850RDA (Series S900):
Continuous Fabric Steamer
- The Steam-X is a unit developed for the inkjet fabric printing. Could be also used in traditional screen printing.
- Designed to provide continuous
steaming process of fixing dyes to the fabric that has been printed by any type of inkjet printer available on the
market.
- The Steam-X is capable of reaching temperatures of steam up to 180 degrees Celsius and it can therefore cure all types of dyes, including reactive, acid and disperse
dyes.
- The unit automatically feeds fabric into an inkjet printer, cures the fabric after printing and winds the fabric into rolls at the completion of the process or as stand alone unit could serve several digital printers.
| |
Units |
Natural
Fiber
(Reactive Dyes) |
Silk
(Acid Dyes) |
Polyester
(Disperse Dyes) |
| Fabric Maximum Width |
mm |
1830 |
| Steaming Temperature |
C |
102 |
175
|
| Maximum Speed |
Linear meters |
20-40 |
10 |
50 |
| Steaming Time |
min |
8-15 |
30 |
6 |
| Fabric Length inside the Steamer |
m |
5.0 |
| Machine Length |
m |
2.0 |
| Machine Width |
m |
2.5 |
| Machine High |
m |
1.3 |
| Water Tank Capacity |
L |
20 |
| Power Consumption |
kW |
10.0 (3 phase power supply) |
| Fabric Roll Diameter max. |
mm |
300 |
| Fabric Feeder |
- |
Included |
STEAMER
- Stainless steel steam chamber with
Teflon coated rollers
- Fabric re-winder
- This unit could handle
reactive, acid, disperse and pigment inks in
the same unit without any additional changes
-
The
selection of the type of the fabric on the control panel will
automatically adjust
the
steam
temperature for the selected procedure.
-
The steam chamber is double walled and is fully
insulated to minimize any heat loss.
-
Included is a steam generator with a steam
boiler, 20l water tank with water level sensor, steam
regulation and automatic condensate recirculation.
-
The steam heating and regulation are controlled
via a digital temperature controller situated on the
electrical cabinet
-
Fabric
re-winder can accommodate rolls up to 300
mm diameter and includes automatic speed control, which is
regulated by a “dancing” bar.
-
All functions of the Steam-X
are controlled by PLC with
touch screen
programmable
terminal in auto and manual mode. The control panel is located
in easy to reach position.
- The entire unit is mounted on swivel
FABRIC FEEDER
- Fabric unwinding device with fabric
tension roller
- Fabric join bar with needle
holder
- Full width scroll roller
- One side automatic edge
control
- The entire unit is mounted on swivel
OPTIONAL FEATURES
- External PC connection.
- Software with Excel file format to read
machine operation data
- Set of recommended spare
parts
- On site installation and training
 >>
zoom
|
|
|
