|
|
Wash-X 1600-2200
Continuous Fabric Washing and
Coating
- The Wash-X is a unit developed for the inkjet fabric printing.
Could be also used in traditional screen printing.
- Designed to provide continuous process of fabric preparation
and fabric washing for the digital printing. Could be also used
as post treatment machine or for colorization of fabrics.
- The Wash-X are actually two machine incorporated into one
unit. They are capable of coating and washing almost any kind
of fabric due to unique design.
- Coating: The amount of coating emulsion could be adjusted
to suit all types of dyes, including reactive, acid and disperse
dyes.
- Washing: Continuous fabric washing suitable for all type of
inks and is design to save as much water as possible.
- The unit automatically feeds fabric into an coating/washing
unit, drying the fabric after coating and winds the fabric into
rolls at the completion of the process.
- All units are exchangeable and works as as plug-in system.
| |
Units |
|
| Fabric Maximum Width |
mm |
1600/2200 |
| Maximum Temperature |
C |
180 |
| Maximum Speed |
linear m/hr |
Up
to 100 (Linear meters) |
| Machine Length |
m |
3.35 |
| Machine Width |
m |
2.5-3.2 |
| Machine Height |
m |
2.02 |
| Tank Capacity |
L |
100 |
| Water
Consumption |
L/hour |
250 |
| Power Supply |
|
220/380V, 50Hz or 110V, 60Hz3 phase, neutral, earth wire,
100A |
| Power Consumption |
kW |
37.0 |
| Fabric Roll Diameter max. |
mm |
350 |
FABRIC FEEDER
- Fabric unwinding device with fabric tension roller for fabric rolls of
350mm
- Fabric join bar with needle holder
COATING/WASHING
- Stainless steel coating/washing unit
- This unit could handle all fabrics of width up 1600-2200mm. Depends on machine model
- The speeds of coating/washing and speed of fabric are adjustable according to used fabric. All
set-ups are accessible using friendly touch screen.
- Separate liquid tank allow easy exchange of used coating formula and is equipped with mixer for
coating formula mixing and constant steering through coating process.
- Washing with possible recycling of previously used water, waist tank, heated pre-wash basin. All incorporated into the same unit.
DRYER
- The dryer is infra-red, double walled and is fully insulated to minimize any heat loss.
- The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet
- Small exhaust fan is situated on top of dryer.
BATCHING
- Fabric re-winder can accommodate rolls up to
350 mm diameter and includes automatic speed control, which is regulated by a
"dancing" bar.
- The unit consists of scroll roller and one side fabric edge control.
- All functions of the Precoat-W are controlled by PLC with programmable terminal in auto and
manual mode. The control panel is located in easy to reach position.
- All units are mounted on swivel wheels.
OPTIONAL FEATURES
- Set of recommended spare parts
- On site installation and training
 >>
zoom
|
|
|
